Electric Bell 8V GNT-921 78dB Two Tone Melody Gong BIM-BAM ZA0003 ZAMEL

Electromechanical doorbell ZAMEL BIM-BAM, model GNT-921, intended for use in closed rooms that are equipped with an 8 VAC bell installation.

Features:

• Electromechanical bell
• For use in rooms equipped with a bell installation with a voltage of 8 V AC
• Loudness: 78 dB
• Sound: two tones of BIM-BAM
• Material: plastic
• Dimensions: 14 x 11 cm

Installation instructions:

• Before starting the work on connecting the installation, you should turn off the 8 V AC voltage supplying the bell installation. With the help of a suitable measuring device, you should make sure that there is no voltage in the bell installation.
• Using a flathead screwdriver, pry up the tab on the bell cover and remove it.
• Determine the mounting location of the bell on the wall and drill two holes corresponding to the mounting holes in the base of the bell. You should pay attention to the vertical position of the bell (marked on the base).
• Insert dowels into the holes.
• Install a screw in the upper dowel and screw it so that it protrudes a maximum of 5 mm.
• Through the round hole in the base of the bell, pull the wires of the bell installation.
• Attach the base to the protruding top screw.
• Attach the base using the second screw, installing it in the lower dowel.
• Strip the insulation from the ends of the bell installation cables to a length of 15 mm.
• Press the terminal pressure lever and insert the ends of the wires into the terminal holes, then release the lever. You should check the correct installation of the cables by gently stretching them. You should repeat if necessary
• previous activity.
• Install the bell cover.
• Switch on the supply voltage of the bell installation 8 V AC.
• Check the operation of the bell by pressing the bell button.