Gypsum plaster 20 kg ST126 54 pcs / pallet

Gypsum plaster CERESIT ST126 is suitable for smoothing walls and ceilings that are pre-plastered and primed, masonry, aerated concrete and building slabs. Fills irregularities from 1 to 10 mm.

Properties

• for layer thickness up to 10 mm
• does not crack in thick layers
• short strength gain time
• high adhesion strength
• high quality white matte finish
• long time of use of the finished solution

CT126 is also suitable for use on plasterboard, felt, decorative plaster or styrofoam elements. Its final treatment can be done in the standard way with sandpaper or by smoothing with a spatula shortly before the applied material hardens. CT126 levels the surfaces, filling in irregularities up to 10 mm when applying one layer. The surface, plastered with CT126, becomes perfectly smooth and matt white, so it can be left as a final coating. If desired, after drying the putty can be painted with paints based on dispersions or organic solvents. The putty is used indoors, in dry rooms without constant moisture.

Technical data:

• Base: A combination of minerals and supplements
• Density: 1.1 kg / dm3
• Mixing ratio: 7 liters of water / 20 kg
• Time of use of the ready solution: 40-60 minutes
• Operating temperature: from + 5 ° C to + 30 ° C
• Estimated cost: approx. 1.2 kg / m2 per mm layer
• Coupling force: at least 0.5 N / mm2
• Tensile strength in bending after 24 hours: min. 0.7 N / mm2
• Compressive strength after 24 hours: min. 1.5 N / mm2
• Drying time: about 1 day / 5 mm layer