Pellet stove with water jacket ONYX HYDRO 12 - output power 12KW, heating area 250 cubic meters, burgundy color

The pellet stove from MARELI SYSTEMS, model ONYX HYDRO 12 has a water jacket and an output power of 12 kW. MARELI SYSTEMS fireplaces are a combination of style, design and quality. With the built-in intelligent control, the use of fireplaces is easy and with minimal maintenance. The fireplace has the ability to connect to a precise room thermostat, which ensures perfect regulation of temperature at home. ONYX HYDRO 12 allows the installation of an air duct that removes up to 85% of heat and creates comfort in an adjoining room. Thus, without much investment, heat can be provided throughout the home, providing wonderful thermal comfort. The simple control panel ensures easy operation of the fireplace.

The ignition of the pellets takes place by means of a ceramic heater and takes place in seconds. Sensors with various functions control the combustion process, water temperature and flue gases, which is an additional guarantee for the safety of fireplaces during operation. The pellet stove manages to heat up to 250 cubic meters without any problems.area.

Thanks to the use of innovative technologies, as well as 5-stage fuel modulation, high efficiency and low CO emissions are released into the atmosphere.All MIRELI SYSTEMS products have a two-year full warranty, and there is an option to extend the warranty.

The fireplace uses for fuel pellets Ф 6 mm and Ф 8 mm, as the average consumption is equal to 1.0-3.8 kg/h.

Features:

• Bunker volume: 15 kg
• Volume of the water jacket: 41 l.
• Working pressure: 0.5-2.0 bar
• El.consumption: 60/310 V/Hz
• El. power supply: 230V 50Hz
• Dimensions: height x width x depth 1010 x 568 x 665 mm
• Fresh air pipe: Ф 48mm
• Exhaust pipe: F 80 cm
• Efficiency: over 95%
• Flue gas temperature: 160°
• Chimney draft: 12 Pa
• Weight: 165kg
• Automatic turbocharger cleaning system
• Built-in circulation pump and expansion vessel