Wood impregnant oil-alkyd Bochemit Estetik Classic pine 5l

Oil-alkyd impregnant for wood Estetik Classic of the BOCHEMIT brand. Color: pine. Estetik Classic is a high-quality oil-alkyd impregnant designed for treatment, protection, coloring and final finishing of wooden surfaces and products in exterior and interior. The product is oil-based - it does not crack, peel or flake.
The innovative formula of the product allows deep penetration and good bonding with the structure of the treated wood. In this way, long-lasting protection of the treated surfaces is ensured.

Estetik Classic is easy to maintain. It can be renovated without having to remove the old layer. It is refreshed with the application of one hand after 5-6 years, without having to sand and remove the old layer.
Even if there are remaining cracks or compromised areas, this does not prevent the new layer from penetrating the wood.

Protects against: rain, snow, water, UV rays, severe weather conditions

Application: solid wood furniture, shacks, wooden structures, porches, sheds, solid entrance gates and doors, headboards, paneling, pergolas, gazebos, benches, other wood products

• Thanks to the added oils, Estetik Classic protects the wood from the influence of atmospheric conditions and prevents the penetration of water into the treated wooden parts.
• The product absorbs deeply and binds firmly to the structure of the wood. Unlike traditional varnishes and paints, which with their larger molecules form a surface film without absorbing into the wood, which is the main reason for cracking and peeling.
• The coating does not crack, peel or whiten over time and is very easy to refresh and maintain. No prior mechanical or chemical preparation is required, such as sanding or treatment with paint or varnish removers.
• Refreshing is done with just one hand, after cleaning the surface from dust.
• The flaper - the patterns of the wood remain visible. The matte natural color without gloss gives a modern, soft and natural look to the processed details.

Preparation of the base:

The surfaces must be sound and cleaned of old coatings that would prevent the penetration and connection of the preparation with the structure of the wood. In order to reduce the consumption rate, it is recommended that the wood is sanded, with large hairs removed, if the treated parts are rough construction wood. If possible, it is good to clean the dirt and resinous stains beforehand with a suitable detergent.

Method of use:

• Sand and dust
• Shake the can 10-15 times vigorously before opening
• Stir constantly during application
• Apply one coat of product
• Allow to dry for 8-12 hours depending on the ambient temperature
• Fine re-sanding with sandpaper number above 180-200 as desired
• Apply the second coat and allow to dry for 12-24 hours
• It takes 3-4 days in dry and sunny weather to reach full strength and drying

Durability of applied protection:

• Interior: over 20 years
• Exterior: 3-6 years. - Then - check and refresh.

The consumption rate depends on the method of application and the conditions of the wood:

• On non-absorbent, hard or fresh soft wood: 10-16 sq.m/l
• On old dried wood: 6-8 sq.m/l

The impregnant is available in a package of 5 l.