Bituminous waterproofing Profi G without sprinkling CCI, 3 kg

Roll waterproofing Technobit Profi G 3 kg/sq.m. is a material with proven high heat resistance and great flexibility.
It consists of APP modified polymer-bitumen prepared from distilled bitumen and plastomeric polymers forming a mixture, the characteristics of which are determined by a polymer matrix. With the roll waterproofing Technobit Profi G the qualities of the bitumen are increased without affecting the adhesion and waterproof characteristics. The material is based on fiberglass, which is non-rotting. With upper and lower protective layer - polymer foil. No sprinkles.
The rolled bitumen waterproofing Technobit Profi G 3 kg/sq.m. mostly used in new construction and repair work. It is designed for waterproofing of foundations as well as roofs of buildings and facilities, waterproofing of building structures in all climatic regions. It is used as the first layer in a two-layer system for pitched or flat roofs. Not recommended for single-layer waterproofing of roofs. It has good dimensional stability, which is why it is usually used as a first or intermediate layer in a two-layer system for pitched or flat roofs. The product is an effective and modern solution for protection against moisture with efficient sprinkling, which is not used in standard versions of waterproofing.
The properties of Technobit Profi G roll waterproofing allow installation with the help of a burner or with a hot air generator. When repairing roofs and building waterproofing on foundations, the installation of the membrane must be carried out under appropriate climatic conditions. The base must be well cleaned and primed before application.
Specifications:
- Flexible flexible tarpaulin, reinforced with fiberglass
- Density: 3 kg/sq.m.
- Bitumen: APP
- No sprinkles
- Base: Fiberglass
- Type of coating from above: Protective polymer film
- Type of coating from below: Protective polymer film
- Length of the roll: 10 m