Tile adhesive 25 kg Ceram 113 C1TE

Ceram 113 C1TE tile adhesive is a mixture of high quality cements, which contain polymers, quartz sand and special additives. It is ready for use by adding only water to obtain the desired consistency of the solution. The Ceram 113 C1TE adhesive is suitable for laying tiles vertically, horizontally, on interior and exterior surfaces. It is recommended to use it on surfaces such as concrete, plasterboard, bricks and screeds. On all cement bases where no significant expansion or drying is expected, as well as on structures and bases where there are no deformations.
It is extremely easy to apply due to its good workability, suitable for application with layers up to 10 mm. There is a shorter open time - about 30 minutes. The working application temperature can be in the range of +5°C to +35°C. The required consistency of the solution is obtained after mixing about 7 liters of water with 25 kg of dry concentrate. Substrates on which the adhesive is applied must be well cleaned, free of loose particles, dust-free, free from oil contamination, lubricants and traces of previous coatings. It is not recommended to apply the solution on wooden or metal surfaces. It is desirable to observe the established thickness of the layer, which is 10 mm. The cost rate depends, to a large extent, on the type of tiles, the size of the trowel teeth and the thickness of the layers laid. It is in the range of 2-5 kg/sq.m, being the lowest for smaller tiles.