Drawn silicone plaster 2 mm CT175, silicate, 25 kg

CERESIT CT175 drawn silicone plaster combines the advantages of various silicone and silicate coatings. It is designed for laying on concrete substrates, lime-cement coatings, gypsum and cement putties, chipboard and gypsum fiberboard. According to the method of application, the product CERESIT CT 174 belongs to the towed plasters. It is used as a final coating when applying the Ceresit Ceretherm thermal insulation system. It is recommended to use darker colors than silicone plaster, when decorating architectural ornaments or those that have a smaller area. CERESIT CT175 is applied on substrates that are strong, clean and dry, free of grease, bitumen, dust and particles that would reduce adhesion. The favorable surfaces for applying silicate-silicone plaster are:

• cement and lime-cement plasters, older than 3 days,
• concrete, over 3 months old
• putty reinforced with fiberglass, aged more than 3 days
• gypsum bases for internal application
• Chipboard, gypsum fiberboard and drywall, which are indoors - paint coatings, located indoors.

Uneven or dirty surfaces must be well prepared for the application of silicate-silicone plaster. They must be smoothed and cleaned of the presence of glue and other binders. The plaster should not be mixed with other materials, and it is recommended to apply it in the temperature range from +5°C to 25°C. It is not recommended to leave the plaster in direct sunlight or heat. It is necessary to protect the CT175 mixture from moisture until it dries completely, avoiding spraying water on the applied coating. CERESIT plaster can be applied, first with metal, and then smoothed with a plastic trowel. The grain size is 2 mm.